Bluegard Range
| 3000 | Colour...................Blue Binder...................Nitrile (NBR) Service..................Water, aliphatic hydrocarbons, oils, gasoline, mild acids and alkalis. Temperature.........-40 to +370 deg 'C'. Continuous operating temperature +205 deg 'C'. Pressure................70 bar max. P x T, max............12000 for 1/32" & 1/16" thick. 8600 for 1/8" thick. (BAR x deg 'C') A good general purpose gasketing material |
| 3200 | Colour..................Off
White Binder..................SBR Service.................Water, saturated steam, mild acids and alkalis, inert gases. Temperature........-40 to +370 deg 'C', Continuous operating temperature +205 deg 'C'. Pressure...............83 bar max. P x T, max...........12000 for 1/32" & 1/16" thick. 8600 for 1/8" thick. (BAR x deg 'C') For saturated steam and other severe service conditions. Meets requirements of MIL-G-24696A |
| 3300 | Colour..................Black Binder..................Neoprene (CR) Service.................Water, saturated steam, refrigerants, oils, fuels, mild acids and alkalis. Temperature........-40 to +370 deg 'C'. Continuous operating temperature +205 deg 'C'. Pressure...............83 bar max. P x T, max...........12000 for 1/32" & 1/16" thick. 8600 for 1/8" thick. (BAR x deg 'C') For use against oils, fuels and refrigerants. |
| 3400 | Colour.................Grey-Black Binder.................SBR Service................Water, saturated steam, mild acids and alkalis, inert gases. Temperature.......-40 to +370 deg 'C'. Continuous operating temperature +205 deg 'C'. Pressure..............83 bar max. P x T, max..........12000 for 1/32" & 1/16" thick. 8600 for 1/8" thick. (BAR x deg 'C') For saturated steam and other severe service conditions. |
| 3700 | Colour.................Light
Grey Binder.................EPDM Service................Water, saturated steam, acids and caustics of moderate concentrations. Temperature.......-40 to +370 deg 'C'. Continuous operating temperature +205 deg 'C'. Pressure..............83 bar max. P x T, max..........12000 for 1/32" & 1/16" thick. 8600 for 1/8" thick. (BAR x deg 'C') The EPDM binder increases serviceability in saturated steam and many alkalis. Also adds exceptional resistance to both weather aging and ozone. |
PLEASE NOTE:
The maximum temperature and pressure do not necessarily apply at the same time and are dependant on gasket thickness and flange arrangement. If in doubt call.
The operating temperature for non-asbestos sheet materials is related to the thickness of material selected, thinner materials offer better temperature and pressure properties.
As the products listed above are used for a multiplicity of purposes, and as we have no control over the method of their application or use, the Company excludes all conditions of warranties, expressed or implied by statute or otherwise, as to their products and/or their fitness for any particular purpose.
Any technical co-operation between the Company and the Customer is given for the Customer's assistance only and without liability on the part of the Company.