Flange Insulation Sets

Henry Gallacher Limited manufacture and stock Flange Insulation Sets. The most common styles are Type 'F' which incorporates the use of an IBC gasket, Type 'E' which incorporates the use of a Full Face gasket and finally Type 'D' which incorporates a Ring Type Joint as the insulating gasket.
	TYPE 'F' The cross sectional diagram here shows how the insulation set is assembled when using an IBC style gasket insert. You can see very Clearly how the opposite flanges are totally insulated from one another.
	TYPE 'E' The cross sectional diagram here shows how the insulation set is assembled when using a Full Face gasket insert. Once again total flange insulation has been acheived.
	TYPE 'D' The cross sectional diagram here shows how the insulation set is assembled when using a Phenolic Ring Type Joint as the gasket. The oval section ring type joint is fitted into the groove of the RTJ flanges. Once again total flange insulation has been acheived.

The standard Flange Insulation Set consists of:

• One Neoprene coated reinforced phenolic gasket, or phenolic RTJ.
• One mylar sleeve per bolt.
• Two reinforced phenolic washers per bolt.
• Two zinc plated mild steel washers per bolt.

Variations of alternative materials for all the components can be supplied on request.

All our gaskets sets come individually boxed and labelled accordingly.

BACK >>>>