Novus Range

NOVUS 10 A premium grade compressed non-asbestos sheet material based on carbon fibre with a high quality nitrile rubber binder.

Max short term service temperature..........450 deg 'C'
Max continuous service temperature........250 deg 'C'
Max operating temperature for steam......250 deg 'C'

 Characteristics & Approvals:
1. good steam resistance
2. excellent creep resistance
3. very low gas permeability
4. high resistance to oils, fuels, hydrocarbons and refrigerants
5. Novus 10 complies with the test requirements of BS 7531 Grade 'X'
NOVUS 30 Also known as Novus Supra, a top grade compressed synthetic fibre sheet material. It consists of a blend of polyaramid and inorganic fibres with a superior nitrile rubber binder.

Max short term service temperature..........400 deg 'C'
Max continuous service temperature........250 deg 'C'
Max operating temperature for steam......200 deg 'C'		 Characteristics & Approvals:
Novus 30 is registered under DIN-DVGW Reg. No. 93.01 e 845 ( in accordance with DIN 3535 part 6FA ) for use in gas applications.
WRC ( Water Research Council ) UK BS 6920 Listing No. 9508502 for drinking water applications.
Novus 30 complies with the requirements of BS 7531 Grade 'Y'.
Novus 30 is a general purpose material suitable for use in applications involving hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals.
NOVUS 34 A superior performance compressed sheet material incorporating a blend of special heat resisting fibres with a high quality nitrile rubber binder.

Max short term service temperature..........400 deg 'C'
Max continuous service temperature........250 deg 'C'
Max operating temperature for steam......250 deg 'C'		 Characteristics & Approvals:
Novus 34 exhibits excellent tensile strength, outstanding gas sealability as well as a high resistance to creep under elevated pressure and temperature. Novus 34 is registered for use with gases in accordance with DIN 3535 part 6FA, DIN-DVGW Reg. No. 96.01 e 845. Novus 34 is approved for use in oxygen up to a pressure of 160 bar and a temperature of 90 deg 'C'. ( BAM test report 2393/96-11-1411 ). Novus 34 meets the requirements of BS 7531 Grade 'X'.
Novus 34 is a general purpose material for use with oils, solvents, gases, steam and most dilute acids and alkalis.
NOVUS GRAFTEC Novus Graftec is a compressed graphite sheet material reinforced with aramid fibre. The material contains a high percentage of graphite with a low binder content and is produced under high load which ensures the material has low gas leakage.

Max short term service temperature..........450 deg 'C'
Max continuous service temperature........300 deg 'C'
Max operating temperature for steam......280 deg 'C'		 Characteristics & Approvals:
1. Good steam resistance.
2. Excellent creep resistance.
3. Very low gas permeability.
4. High resistance to oils, fuels, hydrocarbons & refrigerants.
5. Excellent for handling and cutting.
6. Excellent conformability.
Complies with the requirements of BS 7531 Grade 'X'.
A universal grade material suitable for many industrial applications.

PLEASE NOTE:

The operating temperature for non-asbestos sheet materials is related to the thickness of material selected, thinner materials offer better temperature and pressure properties.

As the products listed above are used for a multiplicity of purposes, and as we have no control over the method of their application or use, the Company excludes all conditions of warranties, expressed or implied by statute or otherwise, as to their products and/or their fitness for any particular purpose.

Any technical co-operation between the Company and the Customer is given for the Customer's assistance only and without liability on the part of the Company.

BACK >>>>